Blog

137B Owner Builder Report: How to Get One and What It Covers

By Awesim

A Section 137B owner builder report is a defects inspection report required under Victoria's Building Act 1993 when an owner-built home is sold within 6 years and 6 months of completion. A prescribed practitioner prepares it, it must be dated within 6 months before the sale contract, and it goes into the Section 32 vendor statement.

Plenty of people reach this topic by the wrong door. They search for a building inspection in NSW, see the Section number in the results, and assume it applies to them. It doesn't. If you are in NSW and need independent evidence for a defect dispute, the relevant path is a building expert witness report, which is a different document for a different purpose. If you are a Victorian vendor, the rest of this guide takes you through the report in the order you will actually do it.

What is a 137B owner builder report, and does it apply in NSW?

A Section 137B report is a defects inspection report on work an owner carried out as an owner-builder. The name comes from section 137B of Victoria's Building Act 1993, which sets out what a vendor must provide to a buyer when selling a home they built themselves.

In practice, the intent is buyer protection. An owner-builder does not carry the statutory warranties a registered builder does, so the buyer has no builder to turn to if concealed defects surface later. The report puts an independent assessment of the work in front of the buyer before they sign. Victorian law requires it where an owner-built home is sold within 6 years and 6 months of completion of the work.

The requirement is specific to Victoria. It is not an NSW obligation, and an NSW vendor selling an owner-built home does not need a Section 137B report. NSW has its own owner-builder rules, and its own mechanisms for defects and disputes.

That difference matters if you landed here from an NSW search. The two documents sit at opposite ends of a property's life:

  • A Section 137B report is a pre-sale disclosure document. It is prepared to satisfy a Victorian statutory requirement and sits in the vendor's sale paperwork.
  • A building expert witness report is prepared for a dispute. It is independent, evidence-based, and written for use in tribunal or court proceedings, such as NCAT in NSW.

Awesim Building Consultants is a building consultancy that prepares expert witness reports and related dispute evidence for homeowners, builders and legal teams across NSW. It does not prepare Section 137B reports. If your matter is a Victorian sale, you need a Victorian prescribed practitioner. The sections below cover who that is and how to engage one.

When do you need a 137B report before selling?

You need a 137B report when you sell an owner-built home in Victoria within 6 years and 6 months of the building work being completed. Outside that window, the requirement does not apply. Inside it, the report is not optional.

The timeframe runs from completion of the work. It does not run from the date you bought the land, started building or moved in.

Here is a short worked example. Say your owner-built home was completed on 1 March 2020. The 6-year-and-6-month window runs until 1 September 2026. If you sign a sale contract on 15 June 2026, you are inside the window and need the report. If you sign on 15 October 2026, you are outside it, and the report is not required.

Timing also works in the other direction. The report must be obtained no more than 6 months before the sale contract is entered into. A vendor planning a sale inside the window cannot produce a report from three years ago. The report has to be recent relative to the contract date, which is covered in more detail later in this guide.

Getting this wrong has real consequences. Failing to provide the required report or insurance when selling an owner-built home in Victoria can result in a fine of up to 100 penalty units. Beyond the penalty, a missing report can stall the sale, because buyers' solicitors tend to notice absent documents in the Section 32 vendor statement.

Your first step is to check your completion date against the calendar before you list the property.

Who can prepare a Section 137B report?

A Section 137B report must be prepared by a prescribed building practitioner. In general terms, that means a registered building inspector, or an architect or engineer working within their qualified field. A builder mate, a family member or a previous contractor on your build is not an appropriate choice, however well they know the property.

The independence is the point. The report exists so the buyer can rely on an assessment that the vendor did not control. A practitioner who worked on the build, or who has a stake in the sale, undermines that purpose.

When choosing a practitioner, check these points before you book:

  • Registration and category: Confirm the practitioner's registration is current and that it covers the type of inspection required for a domestic building. Ask for the registration number and verify it with the relevant Victorian authority.
  • Experience with owner-built homes: Owner-built work often varies in quality and documentation. A practitioner who inspects these properties regularly will know where defects tend to appear.
  • Scope of the inspection: Ask what the inspection covers and how the findings are presented. You want a defects inspection report that identifies issues clearly, not a short checklist.
  • Turnaround time: The report must be dated within 6 months before the sale contract, so a practitioner who can inspect and report promptly helps you control your timeline.
  • Cost basis: Report fees vary by provider and by property, so get quotes from more than one practitioner and confirm what each quote includes.

A report from someone who is not a prescribed practitioner will not satisfy the requirement, and you may need to pay for a second inspection to correct it. Confirming qualifications at the start costs a phone call. Discovering the problem at the Section 32 stage can cost weeks.

What documents should you gather before the inspection?

The inspector can only assess what the paperwork lets them verify. A complete document set shortens the inspection and keeps the report on schedule. Missing records force the practitioner to qualify their findings or chase information, which delays a report that must be dated inside a fixed window.

Gather these before the inspection day:

  • Building plans and specifications: The approved drawings show what was meant to be built. The inspector compares them against the completed work.
  • Building permits: Include the permit for the original work and any variations. A gap between permitted and completed work is a finding in its own right.
  • Certificates of Consent: Vendors often overlook these. Where consent was needed for the work, the inspector will want to see it on file.
  • Inspection and compliance records: Mandatory inspection sign-offs, engineers' certificates and any occupancy documentation from the build.
  • Records of trades and materials: Invoices, product details and installer information help the inspector identify concealed elements they cannot see.

If a document is lost, request a copy from the relevant authority or the original practitioner now, not the week before your listing date. Replacement records can take time to arrive.

How to get a 137B owner builder report, step by step

The process is straightforward when you follow it in order. Each step feeds the next, and the first is the one that catches most vendors out.

  1. Confirm the window. Check that your sale falls within 6 years and 6 months of the work's completion [S1]. If it does not, the report is not required.
  2. Hire a prescribed building practitioner. Engage a registered building inspector, architect or engineer, and confirm their registration before you book [S2].
  3. Supply your documents. Give the practitioner the plans, permits and Certificates of Consent you gathered [S3]. Send them ahead of the visit, not on the day.
  4. Provide safe access. The practitioner carries out a visual assessment of the building elements, so clear access to the roof space, subfloor, wet areas and exterior [S4]. Move stored items away from walls and cupboards you expect them to open.
  5. Receive and review the report. Read the completed defects inspection report and note every identified issue [S5]. Decide how you will handle each one before the home goes to market.
  6. Arrange insurance if it applies. Where the work value exceeds the legal threshold, obtain Domestic Building Insurance or Home Warranty cover [S6]. The thresholds are covered later in this guide.
  7. Put the paperwork in the Section 32 statement. Include the report and any required insurance certificates in the vendor statement the buyer receives [S7].

Treat step 5 as a decision point, not a formality. A report that lists defects does not stop the sale, but a buyer's solicitor will read it. Rectifying or disclosing known issues early is usually cleaner than negotiating them mid-contract.

How long is a 137B report valid?

A Section 137B report must be obtained no more than 6 months before the sale contract is entered into. Past that point the report is stale for the purposes of the requirement, and you would need a fresh inspection.

Order of events matters here. Commission the report too early and the sale drags on, and it can expire before you sign. Commission it too late and you hold up the listing while you wait for the inspection and write-up.

A sensible approach is to book the inspection once you have a realistic listing date, and to ask the practitioner for their turnaround time at the outset. Work backwards from the date you expect to sign. Allow time for the inspection, time for the report, and a margin in case the sale takes longer than planned.

If a sale falls through and you relist after the 6 months have passed, expect to repeat the inspection. Build that possibility into your budget and timeline.

Owner-builder insurance and the Section 32 statement

The report is only one half of what a Victorian vendor discloses. Where the work value is above the legal threshold, owner-builder insurance is also required, and both documents reach the buyer through the Section 32 vendor statement.

For domestic building work completed before July 2026, insurance was required for projects valued at more than $16,000. Under the First-Resort Home Warranty Scheme starting July 2026, that threshold moves to work valued at more than $20,000. Check which regime applied to your build, because the completion date decides it.

The report does not replace the insurance. They do different jobs. The report assesses the condition of the work, while the insurance gives the buyer a route to recovery if defects emerge later. Failing to provide the required report or insurance can result in a fine of up to 100 penalty units, so treat them as a pair.

Once you have both, put the report and any insurance certificates into the Section 32 statement before the home goes to market. A buyer's solicitor will look for them first.

You can avoid much of this at the other end by getting independent oversight earlier. A client-side project manager reviews the contract, schedule and workmanship during the build, when defects are cheapest to rectify and best documented.

FAQs

What fails a building inspection?

An inspection does not usually produce a pass or fail result. The practitioner records defects, non-compliant work and incomplete items, and the report lists what they found. Severity is what counts: structural problems, water penetration and missing approvals weigh more with a buyer than minor finishing items.

Where can I find a free template for a home inspection report?

A template will not satisfy the Section 137B requirement. A prescribed building practitioner must inspect the property and record their own findings. A blank form you complete yourself has no independent standing with a buyer.

How much is a building inspection report in NSW?

There is no single figure. Fees vary by provider, property size and the type of report, and a defects inspection differs from a report prepared for a dispute. Request quotes from more than one practitioner and confirm what each includes. Section 137B is also a Victorian requirement, not an NSW one.

What happens if I sell an owner-built home without a 137B report?

If the sale falls within 6 years and 6 months of completion in Victoria, you risk a fine. You also risk a stalled sale, because a buyer's solicitor will notice the missing report in the Section 32 statement.

Can a builder or friend prepare my Section 137B report?

Only if they are a prescribed building practitioner, such as a registered building inspector, architect or engineer, and independent of the build and the sale. A builder who worked on the property, or a friend without the right registration, will not satisfy the requirement.

Does the report replace owner-builder insurance?

No. They are separate obligations. The report records the condition of the work, while insurance applies where the work value exceeds the legal threshold ($16,000 before July 2026, $20,000 after). A vendor may need to provide both in the Section 32 statement.

Conclusion

A Section 137B report applies only to Victorian owner-built homes sold within 6 years and 6 months of completion, and it must be dated within 6 months before the sale contract. If you are in NSW, it is not a requirement for you.

Start by checking your completion date against the window, then book a prescribed practitioner and confirm whether insurance applies to your build. Do these before listing, so the report and certificates are ready for the Section 32 statement.

author avatar
Awesim
Glen Sim is a highly experienced Building Consultant, Licensed Builder, Construction Consultant, and Expert Witness with more than 35 years of practical experience within the Australian building and construction industry. As the Founder and Director of Awesim Building Consultants, Glen has established a strong reputation throughout Sydney and regional New South Wales for providing independent, evidence-based building consultancy services and expert reporting for complex building and construction disputes.Beginning his career as an apprentice carpenter with TAFE NSW in 1990, Glen completed his apprenticeship in 1993 before progressing into senior construction and management roles across residential, commercial, and remedial building sectors. His extensive industry background provides him with genuine hands-on construction knowledge — something that distinguishes him from many consultants who have limited site-based experience.Glen became a Licensed Builder in Victoria in 2004 before returning to New South Wales in 2011, where he continues to operate under NSW Builder Licence No. 232673C. Over the course of his career, he has worked across all stages of the construction process, including carpentry, supervision, project management, contract administration, construction scheduling, defect rectification, quality control, and dispute resolution.Today, Glen is widely recognised for his expertise in:Expert Witness Reports Scott Schedules NCAT Building Disputes Construction Defect Investigations Building Defect Reports Quantum Meruit Assessments Construction Programming & Delay Analysis Client-Side Project Management Contract & Scope of Works AssessmentsGlen regularly assists homeowners, builders, developers, solicitors, strata managers, insurers, and commercial clients by providing technically detailed and independent reporting for litigation and dispute resolution matters. His reports are prepared with a strong understanding of the requirements of the NSW Civil and Administrative Tribunal (NCAT), court procedures, the Expert Witness Code of Conduct, the National Construction Code (NCC), Australian Standards, and accepted building industry practices. Over 15+ years experience providing litigation support with expert witness reports and Scott schedules. What clients value most about Glen is his practical approach, integrity, attention to detail, and ability to clearly explain complex construction issues in a manner that is easy to understand. His combination of trade-based experience, construction management knowledge, and investigative expertise allows him to identify issues that are often overlooked by less experienced consultants.Over the years, Glen has developed a reputation for producing thorough, methodical, and evidence-supported reports that clients and legal representatives can rely upon during negotiations, mediations, tribunal proceedings, and litigation matters. His commitment to accuracy, professionalism, and impartiality has made Awesim Building Consultants a trusted name in the building consultancy industry across NSW.Glen is also known for his strong commitment to client service, ensuring every matter is approached with professionalism, transparency, and genuine care for achieving practical outcomes. His experience across both metropolitan Sydney and regional New South Wales provides him with a broad understanding of differing construction methods, site conditions, workmanship standards, and project delivery challenges throughout the state.Outside of the construction industry, Glen values family life and regional Australia. He has been happily married to internationally recognised author Audra Starkey since March 2025. Together, they share a passion for supporting rural communities and building trusted professional relationships grounded in honesty and respect.With more than three decades of industry experience, Glen Sim continues to provide trusted building consultancy and expert witness services backed by real construction knowledge, independent assessment, and a commitment to helping clients navigate complex building matters with confidence.

Share the Post:

Scroll to Top